Contattaci
Azienda: Excellent System Limited Integrato
Persona di contatto: Ella Cai
Indirizzo: RM 2501 Jiejia BUILDING FUTIAN SHENZHEN 518031, Cina
Email: [email protected][email protected]
Skype: sales009-EIS
Telefono: 0086-755-23611101
Fax: 0086-755-61679009-109
Contattare la società
Casa > Notizie > Industry News > OMC launches purple SMT LED

OMC launches purple SMT LED

  • Autore:Ella Cai
  • Rilasciare il:2018-07-09
OMC, the Redruth, Cornwall optoelectronics specialist, has launched a high brightness purple surface-mount LED lamp.

The lamp uses OMC’s proprietary Active Diffuser Technology, which is claimed to produce a richer and more efficient output than traditional single-wavelength devices.

The lamp is suitable for applications such as backlighting, mood-lighting, displays and status indication on items such as front panels and keypads, as well as signalling and industrial electronics.

Designated LPRM3268X3, this SMD lamp has a footprint of  3.2mm by 2.8mm, and a depth of 1.9mm, with the industry-standard PLCC package.

OMC’s Active Diffuser Technology combines a blue LED chip with coloured phosphor-based diffuser media in order to manipulate the light wavelength and give the desired output spectrum.

The device efficiency is comparable to blue gallium nitride-based LEDs, which allows other colours to be produced at higher efficiencies than typically achieved when using different chip technologies.

As the output consists of a wide spread of light wavelengths rather than a narrow peak, the result is a more intense, richer colour than traditional LEDs.

Another benefit of active diffuser technology is that it delivers a more homogenous output, eliminating the wire-bond and lead-frame shadows commonly seen in the beam pattern of standard LEDs.

Applying this approach to generate purple light greatly simplifies the task of incorporating purple illumination into a design.

Previously, the most common approaches to generating purple light from an LED was to mix red and blue light from a multichip device, which adds complexity and cost to a design and requires more sophisticated drive circuitry.

As the LPRM3268X3 device contains only a single LED chip, it can be used in the same circuit layout as other standard LED colours, simplifying designs.

Other approaches to generating purple light with LEDs involve the use of a 400nm LED chip, which is typically less efficient and incorporates a significant UV component to the output, which can give rise to its own considerations.